If you're trying to find an improved housing for the original FI-eggs SCS files with a 5.5mm pin, you're looking for:
20260215 SCS Kabuto Housing Sqweeeeeeee - Revision 4
https://odysee.com/@Sqweeeeeeee:1/20250724_SCS-Kabuto-Housing-Sqweeeeeeee:0

This "SCS Kabuto TURD - Sqweeeeeeee Branch" is a continuation of that housing, but with revised SCS files to convert it to a more readily available 5mm pin and remove some material from the front of the Trigger Locking Bar where I have experienced interference with the hammer on multiple rifles, as noted in the readme.

20260315_Rev5 - The housing is the same as Rev4, except the pin hole has been changed to 5mm, which is easier to source. I have modified the SCS files (.dwg files) to convert to 5mm pin, and to remove some material on the front of the trigger locking bar where I had been removing it by hand to prevent interference with the hammer, as noted in the readme.

20260215_Rev4 (and earlier) - Housings for the original FI-eggs SCS files with a 5.5mm pin. This has been well tested and has performed perfectly on every rifle I've tried it in, without modification or customization.

LBRY Tags: fosscad; frt; turd; kabuto; 3d2a