Release image
430 16
AUGGERS paddle release for Standard AUG
Channel thumbnail
jannycad @jannycad:9
NECESSARY TO THE SECURITY OF A FREE STATE, THE RIGHT OF THE PEOPLE TO KEEP AND BEAR ARMS, SHALL NOT BE INFRINGED
PRINT A F*CKING GUN ★ PRINT A F*CKING GUN ★ PRINT A F*CKING GUN ★ PRINT A F*CKING GUN ★ 
RELEASE // lbry // fa8473e2c085f4707ae5ab4…
Released February 11, 2023, 6:26 PM Indexed March 9, 2026, 12:52 AM 1.4MiB

An innovative, fixed pivot paddle release conversion for the AUG that re-uses the stock spring and requires no additional parts.

LBRY Tags: fosscad; aug; guns

300 Blackout 5.56x45mm Bullpup Steyr AUG
  • Explore release archive 18 entries
    This is a preview for indexing purposes only -- you must download this file directly from one of its sources to acquire any of these files. ZeroCompliance does not distribute gun design files or documents.
    EOCD Analysis Pane
    • AUGGERS paddle v1.0 +5
      • Install photos +9
        • 1. Print pieces, remove mag release and collect mag release spring.jpg 70.3KiB
        • 2. Push magazine spring into bottom base recess.jpg 74.9KiB
        • 3. Join hook and paddle.jpg 34.9KiB
        • 4. Place hook and paddle, make sure paddle peg fits into base and the spring is in the hook (red).jpg 55.0KiB
        • 5. Put top base on top.jpg 29.0KiB
        • 6. Put whole assembly into AUG recess.jpg 25.8KiB
        • 7. Try different insertion methods until the assembly sits as pictured. It can be difficult sometimes.jpg 29.3KiB
        • 8. Insert screw, it should go through the hole of the base and the hook.jpg 27.6KiB
        • 9. Fasten bolt (not too tightly) on the other side.jpg 24.8KiB
      • STL +4
        • base-bottom.stl 80.6KiB
        • base-top.stl 506.6KiB
        • catch.stl 74.2KiB
        • paddle.stl 290.7KiB
      • license.txt 34.3KiB
      • orientation.PNG 781.8KiB
      • readme.txt 545B
Edit Tags
appver:314f9455, tc:bot, uid:3f59e936, host:2a6200816966