194
10
NECESSARY TO THE SECURITY OF A FREE STATE, THE RIGHT OF THE PEOPLE TO KEEP AND BEAR ARMS, SHALL NOT BE INFRINGED
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
RELEASE // lbry // e800567a790de793c423253…
Released December 4, 2025, 2:07 PM
Indexed March 9, 2026, 1:17 AM
16.7MiB
Creative Commons Attribution-NonCommercial 4.0 International
“
”
This is an approximate remix of Family Joules's "Apache 3800 37mm Storage grid"
This is for an Apache 4800, and can hold up to 70 37mm cartridges that are just shy of 4-3/4 inches oal (4.72in or 120mm) 5 inch will stand proud by 7mm, but should still be positively retained.
All parts are printable on an x1c size print bed (max dimensions are 228x162.5mm)
uses M4 hardware, I suggest grub screws or you will have to grind the hardware for clearance.
This is a DIY project, set it up how you want to, use epoxy, super glue, or what ever else you feel is needed. You can print as many pillars as you want, I suggest a minimum of 5.
Have fun, be safe, you assume full responsibility by printing this.
LBRY Tags: 3d2a; 37mm; storage; signaling