BS-16 Pistol Grip by Qwerm

A knock off of TangoDown's BG-16 AR pistol grip. This release also includes a STL that allows you to create a textured section on the grip.
This grip is smaller than my BS-17 so if you find this too small I suggest checking out the BS-17.

Orientation: Print it facing up.

Settings Used:
Material: PLA+
Extruder Temp: 210c
Bed Temp: 60c
Layer Height: 0.20mm
Wall Line Count: 4
Infill Percentage: 30%+
Support: No
Fuzzy Skin: Enabled
Fuzzy Skin Outside Only: Enabled
Fuzzy Skin Thickness: 0.1mm / 0.4mm
Fuzzy Skin Density: 10.0mm / 5mm

Read the included PDF guide on how to use multiple fuzzy skin settings.

This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/

LBRY Tags: 3dpg; 3d printed; ar15; pistol grip