Because KaWaTec makes me upset

145 3

Praesidium Group @JerryLo:1

NECESSARY TO THE SECURITY OF A FREE STATE, THE RIGHT OF THE PEOPLE TO KEEP AND BEAR ARMS, SHALL NOT BE INFRINGED

PRINT A F*CKING GUN ★ PRINT A F*CKING GUN ★ PRINT A F*CKING GUN ★ PRINT A F*CKING GUN ★

RELEASE // lbry // cea79981fb576690ca490b6…

Odysee LBRY Desktop

Released March 27, 2025, 7:28 PM Indexed March 9, 2026, 12:53 AM 28.8MiB

“

”

NONE OF THESE ARE MY ORIGINAL DESIGNS

Only reuploading them because KaWaTec is a bitch

No tags

Explore release archive 111 entries

This is a preview for indexing purposes only -- you must download this file directly from one of its sources to acquire any of these files. ZeroCompliance does not distribute gun design files or documents.
EOCD Analysis Pane
- __MACOSX +1
  
  Because KaWaTec makes me upset +5
  
  AUG Mechanical Advantage Trigger and Safety - BenderZee copy +9
  
  Kawacuck-trigger (1) +11
  
  ._09APR2024_Mechanical_Advantage_Trigger_Instructions.pdf 176B
  
  ._Curved_Trigger.step 176B
  
  ._Curved_Trigger.stl 276B
  
  ._Fully_Flat_Trigger.step 176B
  
  ._Fully_Flat_Trigger.stl 276B
  
  ._Left_Housing.step 176B
  
  ._Left_Housing.stl 276B
  
  ._Pusher.step 176B
  
  ._Pusher.stl 276B
  
  ._Right_Housing.step 176B
  
  ._Right_Housing.stl 276B
  
  ._847707-aug-mechanical-advantage-trigger-cd2a2d36-d967-4528-bfc0-321f9f432fce.pdf 343B
  
  ._curved-trigger.3mf 263B
  
  ._curved-trigger.stl 287B
  
  ._fully-flat-trigger.stl 287B
  
  ._Kawacuck-trigger (1) 276B
  
  ._left-housing.stl 287B
  
  ._pusher.stl 287B
  
  ._right-housing.stl 287B
  
  Magazine release +6
  
  AUGGERS paddle v1.0 copy +8
  
  Install photos +9
  
  ._1. Print pieces, remove mag release and collect mag release spring.jpg 232B
  
  ._2. Push magazine spring into bottom base recess.jpg 232B
  
  ._3. Join hook and paddle.jpg 232B
  
  ._4. Place hook and paddle, make sure paddle peg fits into base and the spring is in the hook (red).jpg 232B
  
  ._5. Put top base on top.jpg 232B
  
  ._6. Put whole assembly into AUG recess.jpg 232B
  
  ._7. Try different insertion methods until the assembly sits as pictured. It can be difficult sometimes.jpg 232B
  
  ._8. Insert screw, it should go through the hole of the base and the hook.jpg 232B
  
  ._9. Fasten bolt (not too tightly) on the other side.jpg 232B
  
  STL +4
  
  ._base-bottom.stl 276B
  
  ._base-top.stl 276B
  
  ._catch.stl 276B
  
  ._paddle.stl 276B
  
  ._.DS_Store 120B
  
  ._Install photos 176B
  
  ._license.txt 176B
  
  ._orientation.PNG 232B
  
  ._readme.txt 176B
  
  ._STL 176B
  
  benderzee NATO Mag Paddle copy +8
  
  ._.DS_Store 120B
  
  ._Actuator.stl 312B
  
  ._Left Plate.stl 312B
  
  ._Lever Tighter.stl 312B
  
  ._NATO Magazine Paddle Release Instructions (16MAR2024).pdf 368B
  
  ._Right Plate (Thick) Tighter.stl 312B
  
  ._Right Plate (Thin) Tighter.stl 312B
  
  ._Spacer.stl 312B
  
  KaWaTec +2
  
  ._Hinged mag release.step 263B
  
  ._Hinged mag release2.step 263B
  
  ._.DS_Store 120B
  
  ._AUGGERS paddle v1.0 copy 276B
  
  ._benderzee NATO Mag Paddle copy 212B
  
  ._.DS_Store 120B
  
  ._AUG Mechanical Advantage Trigger and Safety - BenderZee copy 287B
  
  ._AUG Pack Stop copy.stl 638B
- Because KaWaTec makes me upset +4
  
  AUG Mechanical Advantage Trigger and Safety - BenderZee copy +8
  
  Kawacuck-trigger (1) +11
  
  09APR2024_Mechanical_Advantage_Trigger_Instructions.pdf 1.8MiB
  
  Curved_Trigger.step 125.7KiB
  
  Curved_Trigger.stl 3.5MiB
  
  Fully_Flat_Trigger.step 85.9KiB
  
  Fully_Flat_Trigger.stl 2.3MiB
  
  Left_Housing.step 321.6KiB
  
  Left_Housing.stl 4.2MiB
  
  Pusher.step 61.6KiB
  
  Pusher.stl 1.5MiB
  
  Right_Housing.step 323.4KiB
  
  Right_Housing.stl 7.2MiB
  
  847707-aug-mechanical-advantage-trigger-cd2a2d36-d967-4528-bfc0-321f9f432fce.pdf 145.6KiB
  
  curved-trigger.3mf 2.2MiB
  
  curved-trigger.stl 3.5MiB
  
  fully-flat-trigger.stl 2.3MiB
  
  left-housing.stl 4.2MiB
  
  pusher.stl 1.5MiB
  
  right-housing.stl 7.2MiB
  
  Magazine release +4
  
  AUGGERS paddle v1.0 copy +6
  
  Install photos +9
  
  1. Print pieces, remove mag release and collect mag release spring.jpg 70.3KiB
  
  2. Push magazine spring into bottom base recess.jpg 74.9KiB
  
  3. Join hook and paddle.jpg 34.9KiB
  
  4. Place hook and paddle, make sure paddle peg fits into base and the spring is in the hook (red).jpg 55.0KiB
  
  5. Put top base on top.jpg 29.0KiB
  
  6. Put whole assembly into AUG recess.jpg 25.8KiB
  
  7. Try different insertion methods until the assembly sits as pictured. It can be difficult sometimes.jpg 29.3KiB
  
  8. Insert screw, it should go through the hole of the base and the hook.jpg 27.6KiB
  
  9. Fasten bolt (not too tightly) on the other side.jpg 24.8KiB
  
  STL +4
  
  base-bottom.stl 80.6KiB
  
  base-top.stl 506.6KiB
  
  catch.stl 74.2KiB
  
  paddle.stl 290.7KiB
  
  .DS_Store 6.0KiB
  
  license.txt 34.3KiB
  
  orientation.PNG 781.8KiB
  
  readme.txt 545B
  
  benderzee NATO Mag Paddle copy +8
  
  .DS_Store 6.0KiB
  
  Actuator.stl 2.2MiB
  
  Left Plate.stl 1.8MiB
  
  Lever Tighter.stl 8.3MiB
  
  NATO Magazine Paddle Release Instructions (16MAR2024).pdf 1.2MiB
  
  Right Plate (Thick) Tighter.stl 476.7KiB
  
  Right Plate (Thin) Tighter.stl 429.2KiB
  
  Spacer.stl 1.0MiB
  
  KaWaTec +2
  
  Hinged mag release.step 388.2KiB
  
  Hinged mag release2.step 540.0KiB
  
  .DS_Store 6.0KiB
  
  .DS_Store 8.0KiB
  
  AUG Pack Stop copy.stl 3.6MiB

Edit Tags