635
16
NECESSARY TO THE SECURITY OF A FREE STATE, THE RIGHT OF THE PEOPLE TO KEEP AND BEAR ARMS, SHALL NOT BE INFRINGED
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
RELEASE // lbry // 46ea3f123de761ac544d601…
Released March 14, 2023, 10:17 PM
Indexed March 9, 2026, 12:58 AM
267.0KiB
Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International
“
”
This is a brace that is inspired by the CAR15 stock. It fits a standard carbine length tube. The hardware recommended is a cap head M5 bolt 45mm OAL and a spring. The diameter of the head of the bolt needs to be less than 8mm. I used a hex head bolt that was oversized and just rounded it off by putting it in a drill and hitting it with a file. The spring is the generic hardware store spring roughly 8mm diameter, 30mm OAL uncompressed. Any similar sized pin or bolt should work.
LBRY Tags: car15; stubbs; brace; ar15; print