Remix of https://odysee.com/@Snake_Bones:f/glock-pdw-chassis:1

5/5/26 Edit - Fixed printability issues...chamfered bottom 2mm and improved curvature, cut size in half due to strengthed shape...must use 100% infill if using PLA. Booligans Brace fits this flush so use that one - https://odysee.com/@BooliganCustomGunworks:f/BooliBrace-Revision:6 but dont use the pin he lists...use https://www.mcmaster.com/92735A695/ so its flush with the print, spring is fine. For charging handles use https://odysee.com/@Itsmiami:f/GlockMOSCharginghandlesVertical:1

4/30/2026 Edit - Realigned M5 holes, rounded out sharp corners, made a 3mf instead of STEP for settings assist, added charging handle, removed excess material blocking people with larger thumbs from hitting the slide release. Tested in PLA+ and works great.

Beefed up arms by 10mm and made the chamfer more aesthetic, cut the print into printable parts, and added an RMR charging handle.

Needs 4 m5x30 screws for the rear, and two M5x70 for the front, along with 8 nuts...JB weld the nuts in the 9mm hole for longevity...add a dab to the rim of the m5 holes on the rear for strength.

You can probably get away with using an M5x30 for the front...just use one on each side instead of the same side, and then whatever you have for the other two M5 holes.

I JB welded mine together since I never shoot my DD17 and wanted a fulltime braced chassis. Didnt need screws for mine but you plan om taking this off often use only screws.

Print all objects on their flattest surface.