308
9
NECESSARY TO THE SECURITY OF A FREE STATE, THE RIGHT OF THE PEOPLE TO KEEP AND BEAR ARMS, SHALL NOT BE INFRINGED
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
RELEASE // lbry // 4c3358af3d28fb0b88c3bf2…
Released July 21, 2022, 5:47 AM
Indexed March 9, 2026, 1:06 AM
8.3MiB
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
“
”
Close Quarters Evo Grip (CZ Scorpion Evo 3): Laffs Dynamics
A large, curved, forward angle grip for use in close quarters engagements. Has .5mm wrap ridging around the front section.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Print the grip upside-down.
Hardware Required:
1x M4x30mm Bolt (Can be ground down to 28mm, so it doesn't stick out the side)
1x M4 Hex Nut
LBRY Tags: 3d printing; cz; firearms; grip; scorpion