3.8K
44
NECESSARY TO THE SECURITY OF A FREE STATE, THE RIGHT OF THE PEOPLE TO KEEP AND BEAR ARMS, SHALL NOT BE INFRINGED
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
RELEASE // lbry // 3da2a5052d1b3f899ccdaa6…
Released September 13, 2025, 10:55 AM
Indexed March 9, 2026, 12:49 AM
195.1MiB
“
”
Includes every single file I used on my db9-22 build. Uses the full ar22 conversion kit, not a dedicated 22 bolt. Use original Db9-22 conversion files for readme and instructions, along with AWCY? protobarrel instructions.
LBRY Tags: db22; db9-22; fl-eggs
-
Explore release archive 347 entries
This is a preview for indexing purposes only -- you must download this file directly from one of its sources to acquire any of these files. ZeroCompliance does not distribute gun design files or documents.EOCD Analysis Pane-
Db22 full build +11
-
22 Sten mag speed loader +1
- DB22 Sten Speed Loader v3.stl 351.1KiB
-
Dust cover texture panels +3
- Body 01 - Textured v3.stl 9.0MiB
- Body 02 - Textured v3.stl 6.1MiB
- Body 03 - Textured v3.stl 1.3MiB
-
Grips +2
- AFG v2.stl 871.1KiB
- Wushu Grip - Scouts Kung Fu Stipple.stl 27.3MiB
-
Handguards +4
-
Long +2
- long handguard insert.stl 10.1MiB
- Long handguard v2.stl 5.0MiB
-
Medium (older) +4
- 3.5in Handguard (70mm inserts).stl 3.6MiB
- 4.75in Handguard (97mm inserts).stl 4.7MiB
- 70mm TextureInsert.stl 2.0MiB
- 97mmTextureInsert.stl 2.0MiB
-
Short +2
- 3 5-8 guard.stl 2.8MiB
- 3 5-8 insert.stl 1.5MiB
-
Shortest +3
- even shorter guard v2 panel left.stl 43.2KiB
- even shorter guard v2 panel right.stl 43.2KiB
- even shorter guard v2.stl 1.6MiB
-
-
Main build parts +11
- Bolt interface (for slappy).stl 8.8MiB
- Front Insert.stl 1.3MiB
- full conv db9-22 trunnion sten.stl 648.4KiB
- Left Plate.stl 1.5MiB
- protobarrel Metal Thread Adapter Plug.stl 648.9KiB
- Reinforced DB9-22 Slappy.stl 273.7KiB
- Right Plate.stl 1.5MiB
- Slappy with rail.stl 907.8KiB
- Sten Lower Receiver 3pos markings for TURD.stl 33.7MiB
- TURD rear trunnion.stl 235.9KiB
- V4 Sten mag release.stl 224.4KiB
-
Mcxish brace +4
- Center support the long way.stl 79.3KiB
- Link to folding hinge i used.url 79B
- MCXish Carbon Brace.stl 3.6MiB
- NovrStockAdapter.stl 1.2MiB
-
OG files & readmes +4
-
AWCY Proto Barrel v1.1 +4
-
Images +23
- 001.jpg 42.9KiB
- 002.jpg 140.7KiB
- 003.jpg 98.0KiB
- 004.jpg 456.7KiB
- 005.jpg 94.0KiB
- 006.jpg 475.1KiB
- 007.jpg 329.6KiB
- 008.jpg 105.6KiB
- 009.jpg 90.2KiB
- 010.jpg 375.7KiB
- 011.jpg 324.3KiB
- 012.jpg 578.7KiB
- 013.jpg 333.4KiB
- 014.jpg 34.4KiB
- 015.jpg 104.3KiB
- 016.jpg 121.0KiB
- 017.jpg 288.9KiB
- 018.jpg 215.9KiB
- 019.jpg 178.3KiB
- 020.jpg 232.4KiB
- 021.jpg 521.8KiB
- 022.jpg 3.8MiB
- Thumbs.db 418.5KiB
-
Readme + Guides +2
- Proto-Barrel-Build-Guide-v1.1.pdf 4.2MiB
- README.txt 10.8KiB
-
STEP Files +1
- Proto Barrel v1.1.step 76.7MiB
-
STL Files +6
-
1022 Standard Barrel Retainer +2
- Proto Barrel 1022 Standard Retainer 375in Liner Only.stl 1.4MiB
- Proto Barrel 1022 Standard Retainer.stl 1.4MiB
-
1022 Takedown Barrel Retainer +2
- Proto Barrel 1022 Takedown Retainer 375in Liner Only.stl 1.5MiB
- Proto Barrel 1022 Takedown Retainer.stl 1.5MiB
-
AR22 Conversion Barrel Retainer +2
- Proto Barrel AR22 Conversion Retainer 375in Liner Only.stl 1.8MiB
- Proto Barrel AR22 Conversion Retainer.stl 1.7MiB
-
AR22 Dedicated Barrel Retainer +2
- Proto Barrel AR22 Dedicated Retainer 375in Liner.stl 1.3MiB
- Proto Barrel AR22 Dedicated Retainer.stl 1.3MiB
-
Jigs +2
- Proto Jig Epoxy Blocker.stl 20.1KiB
- Proto Jig-O-Matic 3000 for 10mm x 8mm tube.stl 354.1KiB
-
Muzzle End +3
-
Metal Thread Adapter Plug +2
-
375in Liner Compatible +1
- Metal Thread Adapter Plug 375in Liner Only.stl 648.7KiB
- Metal Thread Adapter Plug.stl 648.9KiB
-
-
One Part Option - Permanent +5
-
375in Liner Compatible +4
- Proto Barrel Muzzle Plug and 1-2x28 Threads 375in Liner Only.stl 2.1MiB
- Proto Barrel Muzzle Plug and 5-8x24 Threads 375in Liner Only.stl 2.1MiB
- Proto Barrel Muzzle Plug and Comp Yeezy Edition 375in Liner Only.stl 1.7MiB
- Proto Barrel Muzzle Plug and Sneeki Breeki Threads 375in Liner Only.stl 1.4MiB
- Proto Barrel Muzzle Plug and 1-2x28 Threads.stl 2.1MiB
- Proto Barrel Muzzle Plug and 5-8x24 Threads.stl 2.1MiB
- Proto Barrel Muzzle Plug and Comp Yeezy Edition.stl 1.7MiB
- Proto Barrel Muzzle Plug and Sneeki Breeki Threads.stl 1.4MiB
-
-
Two Part Option - Interchangable +8
-
375in Liner Compatible +7
- Print the Muzzle Adapter Plug stl + Your Threads Option stl.txt 0B
- Proto Barrel Muzzle Comp Yeezy Edition 375in Liner Only.stl 2.1MiB
- Proto Barrel Muzzle Plug Adapter 375in Liner Only.stl 1.1MiB
- Proto Barrel Muzzle Threads 1-2x28 375in Liner Only.stl 2.5MiB
- Proto Barrel Muzzle Threads 3-4x10 375in Liner Only.stl 2.1MiB
- Proto Barrel Muzzle Threads 5-8x24 375in Liner Only.stl 2.3MiB
- Proto Barrel Muzzle Threads Sneeki Breeki 375in Liner Only.stl 1.5MiB
- Print the Muzzle Adapter Plug stl + Your Threads Option stl.txt 0B
- Proto Barrel Muzzle Comp Yeezy Edition.stl 2.1MiB
- Proto Barrel Muzzle Plug Adapter.stl 1.1MiB
- Proto Barrel Muzzle Threads 1-2x28.stl 2.5MiB
- Proto Barrel Muzzle Threads 3-4x10.stl 2.1MiB
- Proto Barrel Muzzle Threads 5-8x24.stl 2.3MiB
- Proto Barrel Muzzle Threads Sneeki Breeki.stl 1.5MiB
-
-
-
-
-
DB 9 Alloy standoff ss remix by m1ke843 +16
- DB 9 Alloy SS readme.pdf 4.8MiB
- DB9 Alloy Standoff Readme.pdf 127.3KiB
- DB9 Alloy Standoff Spacer.stl 93.7KiB
- DB9 ALLOY Standoff SS remix by m1ke843.step 18.3MiB
- DBAlloy Shell Deflectors.stl 299.6KiB
- MAC SS LEVER.STEP 77.6KiB
- OG db9 alloy readme.pdf 1.0MiB
- og db9 alloy ss sten.stl 2.7MiB
- OG style solid rear trunnion smooth top. SS ready.stl 611.3KiB
- one piece rear trunnion sauerkraut v2 mount ss mod_.stl 606.5KiB
- Short Trip.dxf 4.8KiB
- solid rear trunnion for the standoff versions._.stl 533.4KiB
- ss 5.7 db9 alloy by m1ke843.stl 2.8MiB
- SS DB Alloy OG Glock.stl 3.3MiB
- ss glock db9 alloy by m1ke843.stl 2.9MiB
- ss sten db9 alloy by m1ke843.stl 2.6MiB
-
DB9 Alloy Official Release 1.0 +6
-
METAL PLATES +2
- LEFT-PLATE.dxf 9.6KiB
- RIGHT-PLATE.dxf 17.0KiB
-
RENDERS +7
- 57 LOWER.jpg 116.9KiB
- FLAT TOP.jpg 90.1KiB
- GLOCK.jpg 116.1KiB
- print-orientations.jpg 177.1KiB
- QD Back.jpg 59.1KiB
- RAILED TOP.jpg 91.9KiB
- STEN.jpg 119.9KiB
-
STEP +1
- DB9 ALLOY V1.step 70.8MiB
-
STLs +16
-
3D PRINTED STEN MAG PACK +6
-
CURVED MPRTECH MAG BODY +3
- Curved body waffle remix by jackmnb.stl 6.9MiB
- Curved body.stl 261.0KiB
- Curved follower.stl 50.8KiB
-
STRAIGHT MPRTECH MAG BODY +3
- Straight body.stl 592.4KiB
- Straight bodyXL.stl 1.1MiB
- Straight follower.stl 68.5KiB
- Baseplate lock.stl 18.3KiB
- Baseplate.stl 59.3KiB
- Readme.txt 1.2KiB
- Sten latch.stl 5.3KiB
-
-
57 MAG LOWER +3
- 5.7 Mag Release.stl 24.9KiB
- 5.7 Magazine Lower Receiver (Reinforced).stl 5.3MiB
- 5.7 Magazine Lower Receiver.stl 5.2MiB
-
BRACE +4
- Brace Body.stl 2.2MiB
- Brace Button.stl 759.1KiB
- Brace Hinge Mount.stl 900.5KiB
- Button Retainer.stl 65.9KiB
-
GLOCK MAG LOWER +5
- Glock Magazine Lower Receiver (Reinforced).stl 819.7KiB
- Glock Magazine Lower Receiver.stl 794.4KiB
- Glock Magazine Release - Extended Length.stl 33.6KiB
- Glock Magazine Release.stl 33.8KiB
- Glock Specific Feed Ramp.stl 53.8KiB
-
STEN MAG LOWER +4
- Steel Sten Magazine Conversion Insert.stl 27.4KiB
- Sten Magazine Lower Receiver (Reinforced).stl 753.1KiB
- Sten Magazine Lower Receiver.stl 726.4KiB
- Sten Magazine Release.stl 44.4KiB
- Front Insert.stl 1.3MiB
- Mini Hand Stop.stl 114.1KiB
- Razorback Grip .stl 717.6KiB
- Rear Left Insert (flat top QD back).stl 1.3MiB
- Rear Left Insert (flat top).stl 105.3KiB
- Rear Left Insert (railed top QD back).stl 1.3MiB
- Rear Left Insert (railed).stl 111.9KiB
- Rear Right Insert (flat top QD back).stl 1.3MiB
- Rear Right Insert (flat top).stl 85.8KiB
- Rear Right Insert (railed top QD back).stl 1.3MiB
- Rear Right Insert (railed).stl 90.1KiB
-
- DB9 Alloy Official Release 1.0 - Shortcut.lnk 1.3KiB
- readme.pdf 1.0MiB
-
-
DB9-22 Conversion V6 +8
-
Barrel trunnions +4
-
HK Slap barrel trunnions +6
- Slappy Chaszels Glock.stl 2.2MiB
- Slappy Chaszels Sten.stl 2.1MiB
- Slappy Liner Glock.stl 2.4MiB
- Slappy Liner Sten.stl 2.3MiB
- Slappy Protobarrel Glock.stl 5.8MiB
- Slappy Protobarrel Sten.stl 5.7MiB
-
Reciprocating charging handle barrel trunnions +6
- Chaszels Glock.stl 2.3MiB
- Chaszels Sten.stl 2.2MiB
- Liner Glock.stl 2.5MiB
- Liner Sten.stl 2.4MiB
- Protobarrel Glock.stl 5.8MiB
- Protobarrel Sten.stl 5.8MiB
- Barrel trunnions Read me.txt 226B
- Sten print orientation.png 720.2KiB
-
-
Dust covers and Charging handles +11
-
Charging handles +4
- Bolt interface (for slappy).stl 8.8MiB
- Left charging handle.stl 1.7MiB
- Right charging handle.stl 1.7MiB
- Slappy charging handle.stl 577.4KiB
- DB designed right charging cover.stl 16.8MiB
- DB designed slapy cover.stl 18.6MiB
- Left charge without rail.stl 480.0KiB
- Pic rail for metal dust cover.stl 289.2KiB
- Right charge with rail.stl 800.7KiB
- Right charge without rail.stl 565.7KiB
- Sheet metal cover read-me.txt 337B
- Sheet metal cover.dxf 16.9KiB
- Slappy with rail.stl 907.8KiB
- Slappy without rail.stl 670.3KiB
-
-
Magazines +2
-
Glock +3
-
10rnd PP +4
- Modified peasant plinker body.stl 692.0KiB
- PeasantPlinker_10rd_Follower.stl 25.9KiB
- PeasantPlinker_10rd_SpringLock.stl 536.3KiB
- PeasantPlinker_BasePlate.stl 1.0MiB
-
Big PP +4
- BIG PP 25rnd mag.stl 694.1KiB
- Big PP follower.stl 211.3KiB
- BigPP spring retainer.stl 395.2KiB
- PeasantPlinker_BasePlate - Copy.stl 1.0MiB
- Read me.txt 66B
-
-
Sten +11
-
Sten V2 +4
- Base plate.stl 901.2KiB
- Curved body .stl 15.9MiB
- Follower .stl 2.7MiB
- Locking tab.stl 1.1MiB
- Curved sten body.stl 3.7MiB
- Less wiggly follower.stl 2.5MiB
- Mag Follower.stl 687.2KiB
- READ-ME.txt 734B
- Sten base plate.stl 1.2MiB
- Sten locking plate.stl 126.6KiB
- Sten Mag Loader.stl 783.2KiB
- Straight sten mag body.stl 2.7MiB
- Super Lahdi.stl 2.4MiB
- Unmodified Sten follower.stl 2.3MiB
-
-
-
Printed side plates +5
- Left.stl 1.5MiB
- LeftExt.stl 211.8KiB
- Read Me.txt 151B
- Right.stl 1.5MiB
- RightExt.stl 227.1KiB
-
Rear trunnions +8
-
flat top qd rear +2
- left.stl 651.1KiB
- right.stl 653.3KiB
-
flat top rear rail +2
- left.stl 341.5KiB
- right.stl 337.9KiB
-
rail top qd rear +2
- left.stl 669.8KiB
- right.stl 672.3KiB
-
top and rear rail +2
- left.stl 369.0KiB
- right.stl 361.1KiB
- combined.stl 245.8KiB
- Rear trunnion plug.stl 644.2KiB
- sauerkraut hinged rear trunnion.stl 577.6KiB
- TURD rear trunnion.stl 235.9KiB
-
-
Tools +3
- 22 conversion complete upper v50.step 36.2MiB
- Conversion tool v1.step 169.9KiB
- Tools read me.txt 481B
- Barrel filing example.jpg 169.0KiB
- ReadMe.txt 8.3KiB
-
-
-
Sten Mags +3
-
DB22 Curved Waffle Mag +4
- Base plate.stl 901.2KiB
- Curved body .stl 15.9MiB
- Follower .stl 2.7MiB
- Locking tab.stl 1.1MiB
-
DB22 Straight Waffle Mag +5
- Base Plate.stl 71.2KiB
- DB22 Straight Waffle Mag.stl 3.0MiB
- Locking Plate.stl 17.4KiB
- Mag Follower.stl 215.3KiB
- README.txt 73B
-
DB22 Textured Sten Mag +7
-
Pics +2
- IMG_6319.jpeg 3.7MiB
- IMG_6320.jpeg 3.2MiB
- Base plate.stl 901.2KiB
- Follower .stl 2.7MiB
- Locking tab.stl 1.1MiB
- Print orientation.png 164.2KiB
- readme.txt 123B
- Textured curved sten mag v6.stl 7.2MiB
-
-
-
TURD parts +9
-
ambi selector v2 +3
- Selector main.stl 277.8KiB
- Selector right.stl 133.9KiB
- Uses m3x30.txt 31B
- activatorV2-.stl 127.5KiB
- CMMG cam.stl 87.6KiB
- Pin.stl 28.5KiB
- PinHOLLOW.stl 32.1KiB
- Print orientation.png 160.6KiB
- Readme.rtf 1.0KiB
- Trip Sled v4.stl 51.0KiB
- Weight Sled.stl 1.2MiB
-
-
Venturi suppressor +2
-
CF tube venturi +3
- Fl-eggs Note.txt 118B
- Venturi22 end cap(optional).stl 1.1MiB
- Venturi22Custom.stl 13.2MiB
-
OG Venturi Suppressor Pack +6
-
Renders +1
- Diagram.PNG 236.8KiB
-
STEP +4
- Ven22ri Mk 2.3 13-16.step 985.3KiB
- Ven22ri Mk 2.3.step 833.6KiB
- Ven9 13-16.step 680.9KiB
- Ven9 Thread Adapter.step 766.2KiB
-
STL +4
- Ven22ri 13-16x16.stl 1.4MiB
- Ven22ri Standard.stl 1.4MiB
- Ven9 13-16x16.stl 2.0MiB
- Ven9 Standard.stl 2.2MiB
- Assembly Instructions.pdf 691.8KiB
- License.txt 787B
- Readme.md 2.5KiB
-
-
- Hardware list.txt 1.1KiB
-
-