This is a 3D printed lower receiver and considered homemade. Exercise extreme caution when testing your printed lower. Keep firearms pointed in a safe direction regardless if your finger is on the trigger or not. Print and use at your own risk. The creator(s) not responsible for any harm due to a device that you manufactured.

                                               Bill of Materials

        Part Name                    Quantity

        -M5x40mm Socket Head Machine screws..............3
        -M5 nuts and Washers.............................3
        -M3x35mm Socket Head Machine screws..............4
        -M3 nuts.........................................2
        -M3x25mm Socket Head Machine screws..............2
        -M3x10mm Socket Head Machine screws..............1
        -Standard AR-15 Lower Receiver Parts Kit.........1
        -1mm steel/copper wire (45mm length).............2
        -PLA Plus Filament......................approx 235g

Special Thanks to AlphaCureMom69 for the awesome grip texture pack!