This is a collection of Dillon Case Feed Plates Either Found Elsewhere or remixed from other models to fit on normal sized printers.

Also a clutch and wall mount for said plates made by me.

There is a Small Pistol, Large Pistol, Small Rifle, Medium Rifle, and clutch.

The Small Rifle and Medium Rifle were made by https://makerworld.com/en/@LarsaDehlin/upload and work very well.

Since I made the Small Pistol, Large Pistol and Clutch they have published a Small Pistol Plate and Clutch.

They have a few other models for reloading and other such related things if you want to check them out.

Each Plate uses 3x of the same print.

The Plates use 6x M4x16mm socket head cap screws and M4 nuts, you could use 9x screws and nuts per plate but there's no reason to.

The clutch uses 2x M4x20mm socket head cap screws and 2x M4 nuts.

I printed in PLA/PETG, couple walls, 25% infill.

~BushDid711

LBRY Tags: guncad; reloading; dillon; casefeed