A 3D printed Suppressor for your Gambino or Cabfare 22lr gun!

Print Settings:
PLA+ or Stronger
.16 or Lower Detail
100% Infill
20 Walls Top and Bottom
Print front down on bed
NO Supports

Build:
Use a 65mm 22lr Rifled Barrel Liner with a OD of 8mm
Use a 8mm drill bit to pre-drill the hole in the barrel from the breech side down, keep stright!
Use pliers or sandpaper to scratch the outside of the barrel for more surface area
Use 2 part strong Epoxy (JB Weld, Locktight, etc) and wipe the barrels outside with a generus layer
Press the barrel into the barrel body from the breech side, make sure end of liner is level with the barrel frame!
Clean leftover Epoxy, If some epoxy gets in the barrel liner clean out.

NOTICE:
Please now your laws before printing, This is a NFA item in the United States!
Be sure that your barrel liner is inline with the ports of the baffles or you will have baffle strikes!
Always do test shots remotely with a vice and string!
Use Sub-Sonic ammo like Aquila SSS for best results.

LBRY Tags: 3d printed; gun; fosscad; art