1.8K
23
NECESSARY TO THE SECURITY OF A FREE STATE, THE RIGHT OF THE PEOPLE TO KEEP AND BEAR ARMS, SHALL NOT BE INFRINGED
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
RELEASE // lbry // 609356695e27cc00720254e…
Released February 3, 2023, 1:58 AM
Indexed March 9, 2026, 1:00 AM
4.8KiB
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
“
”
This is a super basic jig I made while building 100 Harlot hardware kits to help (me) you cut Harlot barrel liners from a .22 LR barrel liner 6mm OD. Print it, put your barrel liner in there, clamp it down in a vice. Use it as a guide to cut a 37mm length barrel liner with a Dremel cutoff wheel or something. Then use it to hold it firmly in place while you drill the chamber. Offset to one side to let you control the amount of pressure on the liner. Apply just as much pressure as you need to keep the liner from moving.
LBRY Tags: harlot; blc; 2a3d; awcy; gun
No archive preview for this release