This is a JMAC (and compatible ) minimalist cheek rest for the JMAC Custom brace/stock. This model has 2 styles, but also has the f3d file so if you want to modify it yourself, feel free!
one has an attachable “bumper”, this is just if you want to print different materials/colors. see the 3mf for print orientation.
the other one (labeled “SOLID” ) is just one unit.
printing / assembly :
print any resolution/size nozzle. the height/width doesn't matter too much.
infill also doesn't matter much… just try to stay above 10%
use supports. especially on the main cheekrest. you'll want the bottom supported (i don't like printing it on it's top… the curves result in bad layer lines)
for the bumper rest, print with the holes down on the bed
the bumper should be superglued on. (i've used it with GLOOP. almost impossible to take off)
BOM - you'll need m4 screws with an angled head flat head. any M4x4+ will do. i use M4x6