Laffs J Frame Speed Loader (Round Body): Laffs Dynamics

Cylindrical variant of the V2 J Frame Speed Loader.

Filament Used: PLA+

Print Settings:

Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 50%
Support Material Percentage: 22%

Support material only needed for the detent channel at the bottom of the cartridge holder, and under the mechanically
compliant spring/catch on the release knob.

Hardware Required:

1x M3x12mm Hex Screw

Note: The original Laffs J Frame Speed Loader (Ver. 2) can be found here: https://odysee.com/@LFM:f/LFSJFrmSPDLdrV2.0.1:7

LBRY Tags: 3d printing; firearms; revolver; speed loader; j frame; c:disable-comments; c:disable-reactions-video; c:disable-reactions-comments; c:disable-slimes-video; c:disable-slimes-comments; disable-support