Introducing MMK 342-S Open Bolt Action - 22 LR Semi Automatic Pistol

This model is separated version of the MMK 342. Barrel, Upper Receiver and Lower Receiver are seperated from the Frame part to keep it replaceable.

I am looking for cooperations & partnership or business opportunity to create legalized manufacturing, this model is another example for low cost production.

• This model prepared for 22 LR ammunition, tolerances has been given, but haven't tested, remains as a prototype at this moment,

! RISKS ARE YOUR OWN IF YOU'RE GOING TO TEST THIS MODEL !

• After printing all of the parts(14 parts), you need 4 spring(for trigger, trigger holder, striker, magazine) then ready to go!

• This is an open bolt action, if the magazine is loaded and striker was pulled, it will be ready to fire!

• Two Barrel Connector Pin required.

• Two Receiver Connector Pin required.

• This model can be converted to rifle easily.

• Barrel and Lower Receiver printable with bigger nozzle without support (0.8, 1 or 1.2 mm)

• For striker part, Nylon+CF or PC filament recommended.

You can reach me via message, twitter or e-mail, Thank you!

mecitmuratkaya@gmail.com

LBRY Tags: 3d; mmk; 3d design; semi automatic; mmk 342