234
10
NECESSARY TO THE SECURITY OF A FREE STATE, THE RIGHT OF THE PEOPLE TO KEEP AND BEAR ARMS, SHALL NOT BE INFRINGED
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
RELEASE // lbry // 12e87c27e2d8202f9c2ec90…
Released May 18, 2022, 4:25 AM
Indexed March 9, 2026, 1:06 AM
4.6MiB
Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International
“
”
Raven AKM Grip: FFFTech/FFFTechnology
An AKM grip with a shallow rounded backstrap and frontal section.
A fairly wide grip, swells from 24.2mm, (Excluding grip top reinforcement) to 30.1mm towards the bottom. From front to back,
the longest point is roughly 52mm.
The top section's reinforcement is based off the AK12 and AK15 grip.
Comes in two variants:
Standard
Ridged
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4+
Infill: 25%+
Infill Pattern: Gyroid
Material Flow: 100%
Print the grip upside down
Hardware Needed:
1x OEM AK Grip Screw
LBRY Tags: 3d printing; ak; akm; firearms; grip