192
5
NECESSARY TO THE SECURITY OF A FREE STATE, THE RIGHT OF THE PEOPLE TO KEEP AND BEAR ARMS, SHALL NOT BE INFRINGED
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
RELEASE // lbry // 0fd6b7085f2d38d5444908f…
Released January 23, 2026, 4:12 PM
Indexed March 9, 2026, 1:05 AM
4.4MiB
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
“
”
Rossi R92 "Ranger" Stock. When there are 3d printers, why drop $500 on a stock? The grip uses a 6-32x1" cap bolt, with a 6-32 nut. The stock uses 2x 8-32 round bolts with 2x 8-32 nuts.
Start the tang bolt prior to the grip bolt. Once the tang bolt is started, ensure the 'tabs' inside the grip are resting above the lower tang, then tighten the grips and finish tightening the tang bolt.
The version I've printed is from PLA+, 40% gyroid infill, 0.16mm layer height.
LBRY Tags: 3d; 3d2a; rossi; r92; lever action