1.3K
16
NECESSARY TO THE SECURITY OF A FREE STATE, THE RIGHT OF THE PEOPLE TO KEEP AND BEAR ARMS, SHALL NOT BE INFRINGED
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
RELEASE // lbry // 3c418a051fa29f009d033d4…
Released October 10, 2025, 1:04 AM
Indexed March 9, 2026, 1:08 AM
5.8MiB
“
”
Compensator for the TX22. Heavily inspired by the comp designed by Pembleton, but redesigned from scratch because I wanted to change some of the dimensions and lines a bit to align with the slide better and added a step on the rear face for the wider barrel portion so you can screw it almost right up to the face of the slide.
1/2"-28 threads should screw on snugly as printed, but for cleaner threads chase it out with a tap. Print the face with the threaded hole down and with tree supports on overhangs but not in the threads themselves. Uses an M4x25 screw and nut to tighten down.
Printed a few with PPA-CF and they hold up quite well.
LBRY Tags: tx22; compensator; guncad
No archive preview for this release