A taco style mag pouch for pistol mags. It was designed for Glock magazines, but should work with other double stack pistol magazines. Utilizes a shock cord for retention. It can be mounted to a belt or MOLLE webbing, attached together in a double mag configuration, or attached to the front of my Taco AR15 Mag Pouch. The MOLLE strap is designed for traditional webbing and may not work with laser cut MOLLE panels.

When assembling, it may be necessary to use a longer M4 screw to first fully seat the nut into the pockets. Assembling a double mag setup requires an additional 2x M4X8 screws and 2x M4 nuts. Using a pair of pliers can assist in inserting the two screws from the inside of the pouch. You can also remove the belt/MOLLE clip and use the holes on the back of the pouch as an access point for a hex key.

Required Hardware:
2x M4x8 Button Head Machine Screws
2x M4 Nuts
1x Cord Lock
1/8 Inch Shock Cord

Recommended Print Settings:
Material: PLA+ or PETG
Layer Height: 0.2mm
Wall Line Count: 5
Infill Percentage: 15%+
Support: Only on MOLLE Strap

LBRY Tags: guncad