1.4K
48
NECESSARY TO THE SECURITY OF A FREE STATE, THE RIGHT OF THE PEOPLE TO KEEP AND BEAR ARMS, SHALL NOT BE INFRINGED
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
RELEASE // lbry // 98394bfdefc118e6a974293…
Released February 21, 2023, 4:37 PM
Indexed March 9, 2026, 12:51 AM
113.5KiB
“
”
The Target Clip is designed to hold cardboard targets to 0.375” rebar.
Cardboard with a thickness of 0.100” to 0.125” is recommended. The clip is pushed onto the edge of the cardboard, and then snapped onto the rebar stake. Two rebar stakes and several clips on each side of the cardboard may be required. A board with spacing holes drilled in it is recommended to set the spacing of the rebar. This board rests on the ground.
LBRY Tags: target; 3dprinting; clip; hoffmantactical; guns