This is an updated version of the AUG trigger sear.
Augsear3 is the binary version, and has enhanced strength over the last version.

Augsear4.1 also has enhanced strength, and manages to function 3mm back, while not being binary.
It has a very short trigger pull, and the material in the back has been moved back so it won't move as far.
I had to move the sear downwards to make it not shoot binary, as the other files were higher than the original sear.
I also moved the catch section back 1.4mm from the augsear3 to make it not shoot binary. Otherwise it'd be too far away.
Printed in PLA, but recommend PLA+ for impact resistance (haven't shot with it yet).
Wall thickness reduced to 12, since I was having blobs in the middle with 999 wall thickness.
Nozzle temp was 210c for this, but 200 should work. Bed 60c.
Tree supports worked best for me, but some work may need to be done to clear the plastic from the pin holes.

LBRY Tags: aug; trigger; sear