GP9 parts with updated ergonomics, strength, and attachments. Includes MLOK slots, QD insert hole, monolithic construction, and a lengthened G17 magazine version. NEO9 upper cowl includes rear charging functionality, MLOK slots, and improved sights.
For PY2A G19 Gen 3/5 rails. Gen 5 rails will need to be cut slightly, though.
Use paint-on fuzzyskin (or whatever your slicer's equivalent is) on the separated-off grip parts, or use the Turing noise textured lower. (currently only available for 17 length lower).
Charging handle sled's "peg" has a large gap between it and the handle. This is to compensate for different slides' differing height optics mount. Therefore, a screw and threaded insert (described in BOM) are present to adjust the height. When adjusted properly, the handle operating rod should not be able to "fall" down into the upper cowl.
These are optional parts for my GP9, a G19-based PDW. See original GP9 post for other required parts and documentation. (https://odysee.com/@ciwielab:b/ciwielab-GP9V1:a)
New Hardware (Not including regular GP9 hardware):
2x 9271K17 Torsion spring (https://www.mcmaster.com/9271K17/)
2x M3x12 Button head cap screw
1x M3 brass threaded insert
1x M3 socket head or countersink screw (charging handle tightener)
1x Hyperion2A Heat-set QD sling socket (optional)
MLOK hardware for mounting accessories
1.75mm loose filament of any contrasting color for ironsight dots
Most recent changes:
- Added RMR boss holes in charging sled
- Changed charging handle spring preload
- Added new upper with rear charging
- Improved upper areas with thin walls
- Added new lower (G17 length) with turing noise style grip texturing (.STL only)
LBRY Tags: 3d2a; gp9; tp9; pdw; glock