These are 1/6th scale IPSC target models meant for use in your dryfiring training. Every model has within it several 6mmx2mm magnet pockets which allows you to easily configure your target to the presentation you want. The pockets are designed for a pressfit, but you may want to add a dab of CA glue or put a layer of masking tape on the back to hold them in more securely, if you find your printer's tolerances aren't giving you a tight enough fit.

You can print these in any orientation, but I find that printing the target base holes down with supports and printing the hard cover pieces holes up works the best.

The TargetBody uses 5 magnets, 4 of which are used for securing the hardcover pieces, with 1 central magnet for use with a forthcoming stand I have in the works.
The HardCover pieces all use 2 magnets for secure attachment to the TargetBody base.

You'll need a minimum of 21 magnets to craft the whole set. Although I'd recommend more so you can make additional TargetBody bases.

Magnets can be procured from your favorite online retailer. I used these: https://www.amazon.com/gp/product/B0CZ71S57Y?th=1

Edit) Added a 1/2" PVC Mount for use as toppers for these stands: https://www.printables.com/model/664463-pvc-livedry-fire-target-stand
It uses one 6mm magnet of the same type and can easily support 3-4 targets worth of weight in my testing.

Edit) 1/3rd targets have been added per a request. I personally thing 1/3rd targets are better made from cardboard given how much print-bed they require to print, but whatever. My testing showed that these and 1 additional hard cover can be supported by the PVC mount.

Printables Tags: target; ipsc; uspsa; dryfire; ipsctarget