616
11
95
NECESSARY TO THE SECURITY OF A FREE STATE, THE RIGHT OF THE PEOPLE TO KEEP AND BEAR ARMS, SHALL NOT BE INFRINGED
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
RELEASE // printables // printables-1121414
Released December 27, 2024, 12:09 AM
Indexed March 28, 2026, 5:20 PM
4.9MiB
Creative Commons — Attribution — Noncommercial — Share Alike
“
”
Wanted to connect my Dillon case feeder to my Lee 6 Pack Pro and APP. For some reason, the only adapters I could find were $45 on Ebay, which is absurd.
There are 4 major components:
- Dillon case feeder to spring tube adapter.
- A spring tube. Can get one off AliExpress or something.
- Spring tube to Lee tube adapter.
- Lee tube that probably came with your Lee press.
There are two spring tube sizes supported. 16mm is the one to get-- it will work for anything up to like .45 ACP or 6.5 Creedmoor or whatever.
14mm is also supported since it's what I had on hand initially, but it will not fit .45 ACP, etc.
Also included is an optional flange to mount the case feeder to the bench with a 1" wooden dowel from Home Depot or something.
Recommended print settings for the adapters:
- 0.12mm layer height
- 2 walls
- 15% infill
Recommended print settings for the flange:
- 0.2mm layer height
- 4 walls
- 25% infill
Video:
Printables Tags: dillon; lee6000; reloading; casefeeder; leeapp; lee; leeprecision; lee6pp; 6packpro
No archive preview for this release