the moment is finally here. the FGC-6 now called FGC-6H is finally here after a lot of chances to replicate the FGC-9 as close as possible as a airsoft model is it finally here.

in case you want to read more about the FGC-6H and his side projects before you start building one. then look at the PDF: FGC6 project explained

this kit comes with a lot of options! so read the PDF’s well before you start so you know what to select to print and buy.

this project have been tested with green gas, red gas and HPA and it got a working range with the current springs of 80/90 up to 140 Psi on HPA.

look for shrouds and stock in the FGC-6H MKI or MKI collections

FGC-6H MKI and Hybrid link:
https://cults3d.com/en/design-collections/UntangleART/fgc-6-h-mki
https://www.printables.com/@UntangleWORKS/collections/451551

FGC-6H MKII / MKIISD link:
https://cults3d.com/en/design-collections/UntangleART/fgc-6-h-mkii
https://www.printables.com/@UntangleWORKS/collections/451552

the advanced parts will be released in a separate package. note: only use them as fine tuning and experimental parts! your FGC-6H should work with the parts provided in this starter kit.

movie link:
roller bearing hammer
https://youtu.be/jsGwoxNXUaY

upper sand tool
https://youtu.be/-QtMWLSduyY

FGC-6H: how it works and comparing the heavy bolt vs normal bolt
https://youtu.be/LdJmSrGvDCI

FGC-6H the it finally works announcement for the hammer fired airsoft replica of the FGC-9
https://youtu.be/10zl7eHIfk8

note to printable users: you have to scroll down and also download all other files! to get you hands on the PDF’s

print settings:
0.2 layer hight should be fine.
you can use the 8 layer walls and a 40% infill.
but personally I moved a bit over to solid prints just to give it more strength in case things go wrong on the field…

for the lower I would use a brim on both the outside and inside the part just to prevent it from warping

LBRY Tags: fgc6; fgc6h; airsoft; fgc9; replica