12.4K
279
11
2.5K
NECESSARY TO THE SECURITY OF A FREE STATE, THE RIGHT OF THE PEOPLE TO KEEP AND BEAR ARMS, SHALL NOT BE INFRINGED
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
RELEASE // printables // printables-540643
Released March 8, 2026, 5:24 AM
Indexed March 28, 2026, 10:00 PM
4.1MiB
Creative Commons — Attribution — Noncommercial — NoDerivatives
“
”
+3 Magazine Extensions for 9 x 19 Glock 17 OEM Magazines.
Additional Hardware Required:
- M3 Threaded Inserts
- DIN 912 M3 x 6mm Hex Socket Head Screw or equivalent
- Soldering iron or long M3 Screw + heat source
- Sharp knife or Dremel
Recommended Print Settings:
- 4+ Perimeters
- 100% Infill
- 0.15mm Layer Height
Instructions:
- Disassemble the magazine
- Remove the two lugs on the bottom of the magazine with a sharp knife or dremel tool.
- Use a soldering iron or a long M3 screw + a heat source to heat and seat the threaded inserts into the provided 4mm blind holes.
- Reassemble the magazine using the original spring and spring retaining plate.
- Lock the extension in place with two M3 x 6mm screws
*Local laws apply*
If you need anything, feel free to reach out! Questions/Suggestions/Criticism is highly appreciated. Happy Printing…
Printables Tags: ammo; gun; 9; glock; shooting; extension; tactical; pewpew; magazine; 9mm; pew; 9mmnato; 9x19mm; 9x19; 9mmparabellum; 9mmluger; tacticool; tacticalgear; 9mmpara; glonk; extendo
No archive preview for this release