This mount allows you to mount an Akro Mills Bin to the front bar of the Hornady LNL AP press. Stock Hornady bins are the 30210 models.

*Bin Mount Sizes*

Single

Double (about 75% support of each bin)

Double Longer (100% support of each bin)

*Clamps*

There are 2 different castings of the Hornady LNL AP press. Old style had more of a square shape support bar and the newer presses are a little wider.

Old Clamp fits older square bar presses.

New Clamp V7.3 should fit the newer presses.

New Clamp V8.3 is a little wider and may fit some newer presses better.

New Clamp V9.2 is my newest design and should clamp down better.

*Misc*

Akro Bin expander should work on most bins in the same size range as the stock bins.

*Print Settings*

Nozzle 0.4mm or 0.6mm

Walls 4 or more for 0.4mm nozzle and 3 for 0.6 nozzle.

Top layers 3 and 2 bottom layers.

Infill 20-25% Gyroid

Tested with ESUN PLA+ and GST3D PLA+.

No supports needed.

*Hardware*

Designed for using #8 5/8" screws. Hillman 31161500 at Lowes.

Printables Tags: akro; akrobin; akrobins; akromills; akromils; brasstray; bullet; bullettray; cartridgereloading; hornady; hornadylnl; hornadylnlap; hornadylocknload; reloading; reloadingpress; reloadingtools; reloadingtray