This is a redesign of the primer tube cap that is included with the Hornady Lock n Load AP.  This model extends both the "legs" and the top allowing the insertion of primers tubes (Hornady, DAA etc) while keeping to the same original Hornady design aesthetics.

*Note, this was designed for and printed in ABS, as such, hole dimensions might be off if printed in other materials as I designed this for ABS shrinkage.  Ive included the .f3d file with the parametric settings still applied if you need to adjust diameter, you can do so on the initial sketch

Print Settings

• ABS
• .4 nozzle/line width
• 2 walls, 4 top/bottom
• 50% infill cubic

Printables Tags: hornadylocknload; reloadingpress; reloading; hornady; hornadylnl