I needed a way to attach my Hornady Primer Bottle to my desk leg but wanted something a bit more elegant then just using Velcro.  This is a 2-part piece that prints without supports.  My desk legs are 2" square but the model should be able to be adjusted as I left all the parametric steps in the f3d file.  Just print the 2 parts, insert 2 heat inserts from the back of the square piece, screw them together and slide a piece of Velcro through the slots included.

*Note this was designed for and printed in ABS and the specific shrinkage attributed to ABS, if using PLA or another type of material you might have to adjust the dimensions.

• 2 x m3x5x4 heat insert (Voron standard heat insert)
• 2 x M3x6mm SHCS (8mm will work but might protrude a tiny bit)
• piece of Velcro

• ABS
• .4 Nozzle/Line Width
• 4 tops/bottoms
• 2 walls
• 25% infill - cubic

Printables Tags: reloadingpress; reloading; hornady; hornadylnl; hornadylocknload