Designed this quick model to be able to remove/reinstall the bushing in the top of Redding reloading presses without having to go out and purchase a very large socket.

I recommend printing in a more rigid-material as they can take a decent bit of torque both on the square drive side and the on the actual socket points too. PC or a PA-CF is preferred, but you can also make do with PETG as well, like I did on the first version.

Print HIGH wall number (at least 5-6 walls) and a reasonably high infill percentage. I did 70% of 3D Honeycomb for good force distribution and strength. 

If you don’t have a printer and would like this made for you, send me a message and I can print you one!

Printables Tags: 6point; redding; reloading; bushing; socket