525
12
1
89
NECESSARY TO THE SECURITY OF A FREE STATE, THE RIGHT OF THE PEOPLE TO KEEP AND BEAR ARMS, SHALL NOT BE INFRINGED
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
RELEASE // printables // printables-1028560
Released October 4, 2024, 2:20 PM
Indexed March 29, 2026, 10:00 PM
1.1MiB
Creative Commons — Attribution
“
”
I've got models for 223, 308 (& family), Magnum family (e.g. 300 prc)
The baskets need to be printed in vase mode with 0.8mm wall thickness, I've had no problems with PLA or PETG though PETG is probably better, PLA is plenty flexible enough.
Also included is a divider for each size, so if you can't fill your basket, put a divider in so your cases don't fall over. Dividers, print however you like: doesn't need much fill.
Printables Tags: shooting; 223; reloading; 300; 308
No archive preview for this release