Release image
17.7K 100
Wisp
Channel thumbnail
@kaewon @kaewon:9
NECESSARY TO THE SECURITY OF A FREE STATE, THE RIGHT OF THE PEOPLE TO KEEP AND BEAR ARMS, SHALL NOT BE INFRINGED
PRINT A F*CKING GUN ★ PRINT A F*CKING GUN ★ PRINT A F*CKING GUN ★ PRINT A F*CKING GUN ★ 
RELEASE // lbry // 6aed4c579afac584f361a37…
Released October 13, 2024, 7:26 PM Indexed March 9, 2026, 12:53 AM 84.0MiB

99% printed AR based 22LR bolt action

Changelog:
V0.1 release
V0.2 added dxf files, standard AR friendly uppers, barrel adapter for old mossberg 702 but this has not been validated
V0.3 added plain barrel nut for other AR handguards, reinforced stock risers
V0.4 added reinforced bolt handle, removed bolt catch cutout on AR friendly uppers as it hits the bolt(bolt may be redesigned later for it to be compatible)
V0.5 added 10/22 barrel adapter
V0.6 reinforcement plate now attaches with screw
V1.0 official release, added 16mm barrel, updated dxf
V1.1 added alternate length bolts for easy headspace adjustment, added barrel shim, guide updated

No tags
  • Explore release archive 114 entries
    This is a preview for indexing purposes only -- you must download this file directly from one of its sources to acquire any of these files. ZeroCompliance does not distribute gun design files or documents.
    EOCD Analysis Pane
    • barrels +14
      • barrel adapter 1022 L.stl 44.5KiB
      • barrel adapter 1022 lefthand L.stl 44.5KiB
      • barrel adapter 1022 lefthand R.stl 44.5KiB
      • barrel adapter 1022 R.stl 45.0KiB
      • barrel adapter old 702.stl 118.1KiB
      • barrel adapter rs22.stl 118.1KiB
      • barrel extension 12mm.stl 75.7KiB
      • barrel extension 16mm.stl 75.7KiB
      • barrel extension liner.stl 84.8KiB
      • barrel extension proto.stl 967.1KiB
      • barrel liner blank.stl 41.7KiB
      • barrel liner threaded 1-2x28.stl 450.2KiB
      • barrel liner threaded 14mm-.stl 479.4KiB
      • barrel shim.stl 29.2KiB
    • bolts +14
      • alternate bolt lengths +10
        • bolt longer 1.stl 126.4KiB
        • bolt longer 2.stl 126.4KiB
        • bolt reinforced longer 1.stl 139.8KiB
        • bolt reinforced longer 2.stl 139.8KiB
        • bolt reinforced longer 3.stl 139.8KiB
        • bolt reinforced shorter 1.stl 139.8KiB
        • bolt reinforced shorter 2.stl 139.8KiB
        • bolt reinforced shorter 3.stl 139.8KiB
        • bolt shorter 1.stl 126.4KiB
        • bolt shorter 2.stl 126.4KiB
      • bolt handle cap.stl 53.0KiB
      • bolt handle detent.stl 28.1KiB
      • bolt handle knob cone.stl 4.0MiB
      • bolt handle knob cylinder.stl 6.1MiB
      • bolt handle knob sphere.stl 4.1MiB
      • bolt handle reinforced.stl 3.1MiB
      • bolt handle.stl 3.1MiB
      • bolt reinforced plate template.stl 21.0KiB
      • bolt reinforced rim.stl 38.8KiB
      • bolt reinforced.stl 139.8KiB
      • bolt.stl 126.4KiB
      • ejector.stl 17.3KiB
      • extractor.stl 11.0KiB
    • dxf files +4
      • Wisp Bolt Reinforced Plate.dxf 5.7KiB
      • Wisp Bolt Reinforced Rim.dxf 29.0KiB
      • Wisp Ejector.dxf 5.6KiB
      • Wisp Extractor.dxf 4.2KiB
    • handguards +5
      • handguard 3,5in full rail.stl 1.0MiB
      • handguard 3,5in partial rail.stl 1.0MiB
      • handguard 9,5in full rail.stl 1.7MiB
      • handguard 9,5in partial rail.stl 1.7MiB
      • plain barrel nut for other AR handguards.stl 373.9KiB
    • lpk +14
      • bolt_catch_detent.stl 353.0KiB
      • hammer.stl 1012.3KiB
      • hammer_stud.stl 479.1KiB
      • mag_catch.stl 3.8MiB
      • mag_catch_button.stl 3.6MiB
      • pivot_pin.stl 61.0KiB
      • safety_detent.stl 87.1KiB
      • safety_detent_alt.stl 28.2KiB
      • safety_selector.stl 1.4MiB
      • safety_selector_alt.stl 1.3MiB
      • takedown_pin.stl 61.0KiB
      • trigger flat.stl 1.6MiB
      • trigger.stl 2.8MiB
      • trigger_stud.stl 651.6KiB
    • mags +2
      • regular +4
        • mag_body_15.stl 443.9KiB
        • mag_body_25.stl 985.1KiB
        • mag_follower.stl 202.6KiB
        • mag_top.stl 676.5KiB
      • slim +2
        • separate baseplate +7
          • baseplate retainer.stl 287.1KiB
          • baseplate.stl 45.0KiB
          • body 10.stl 645.3KiB
          • body 15 straight.stl 629.7KiB
          • body 15.stl 702.6KiB
          • body 25.stl 857.1KiB
          • follower.stl 202.6KiB
        • separate top +6
          • body 10.stl 317.0KiB
          • body 15 straight.stl 309.0KiB
          • body 15.stl 377.9KiB
          • body 25.stl 536.5KiB
          • follower.stl 202.6KiB
          • top.stl 370.7KiB
    • pistol brace +7
      • small +3
        • brace small with QD.stl 962.9KiB
        • brace small.stl 439.2KiB
        • hook small.stl 222.9KiB
      • brace with QD.stl 962.9KiB
      • brace.stl 439.2KiB
      • button.stl 56.4KiB
      • hinge.stl 38.8KiB
      • hook.stl 222.9KiB
      • mount.stl 127.2KiB
    • receivers +8
      • lower receiver regular mag with detent.stl 2.1MiB
      • lower receiver regular mag.stl 2.0MiB
      • lower receiver slim mag with detents.stl 2.1MiB
      • lower receiver slim mag.stl 2.0MiB
      • upper receiver rs22 standard AR friendly.stl 1.2MiB
      • upper receiver rs22.stl 1.1MiB
      • upper receiver standard AR friendly.stl 1.2MiB
      • upper receiver.stl 1.1MiB
    • stock +12
      • button.stl 56.4KiB
      • buttpad riser reinforced.stl 11.5MiB
      • buttpad riser.stl 11.5MiB
      • buttpad.stl 178.8KiB
      • cheek pad riser reinforced.stl 15.5MiB
      • cheek pad riser.stl 15.5MiB
      • cheek pad.stl 148.5KiB
      • hinge.stl 38.8KiB
      • mount.stl 127.2KiB
      • stock fixed.stl 742.0KiB
      • stock folding.stl 719.0KiB
      • wheel.stl 1.7MiB
    • Guide.pdf 13.2MiB
    • LICENSE AND DISCLAIMER.txt 192B
Edit Tags
appver:877f77e0, tc:bot, uid:bb99f9e2, host:7c72463dfebd