281
8
NECESSARY TO THE SECURITY OF A FREE STATE, THE RIGHT OF THE PEOPLE TO KEEP AND BEAR ARMS, SHALL NOT BE INFRINGED
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
RELEASE // lbry // 1a66f2dbb9e4ac88363bb48…
Released February 28, 2026, 9:34 PM
Indexed March 9, 2026, 1:06 AM
8.4MiB
Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International
“
”
A vertical and horizontal mag coupler for 10 round P-Mags and Hochul Mags. Includes versions for all P-Mags, all Hochul mags, and half/half.
WARNING: The coupler will prevent an AR-15 dust cover from fully opening after the mag is inserted. I recommend making sure the dust cover is open prior to inserting the coupled magazine.
Recommended print settings:
Material: PETG, PET, or PA6
Layer Height: 0.2mm
Wall Line Count: 5
Infill Percentage: 15%+
Support: No
This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/
LBRY Tags: guncad; fosscad
No archive preview for this release