Vertical P-Mag/Hochul Mag Coupler

555 16

QwermMakes @Qwerm:6

NECESSARY TO THE SECURITY OF A FREE STATE, THE RIGHT OF THE PEOPLE TO KEEP AND BEAR ARMS, SHALL NOT BE INFRINGED

PRINT A F*CKING GUN ★ PRINT A F*CKING GUN ★ PRINT A F*CKING GUN ★ PRINT A F*CKING GUN ★

RELEASE // lbry // 789637f21c26f12399f1db7…

Odysee LBRY Desktop

Released November 25, 2023, 3:14 AM Indexed March 9, 2026, 1:07 AM 2.4MiB Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International

“

”

Vertical P-Mag/Hochul Mag Coupler by Qwerm

A series of vertical mag couplers designed for P-Mag's and 3D printed Hochul magazines. Designed for use in states that limit you to 10 round magazines. Couple two 10 round magazines to have a quick reloading set-up in the size of a 30 round magazine.

Orientation: Print with the hole facing down. Make sure you have good bed adhesion. Include a support blocker covering the top half of the print.

Settings Used:
Material: PLA+
Extruder Temp: 60c
Bed Temp: 210c
Layer Height: 0.20mm
Wall Line Count: 5
Infill Percentage: 50-100%
Support: Yes
Support Structure: Tree
Support Placement: Touching Buildplate
Fuzzy Skin: Disabled

Credit to Remnants for the Hochul Mag.

LBRY Tags: ar15; pmag; hochul mag; magazine; 3d printed

Rifle CC-BY-NC-SA Remixable Sharable AR-15 Magazine

No archive preview for this release

Edit Tags