767
12
NECESSARY TO THE SECURITY OF A FREE STATE, THE RIGHT OF THE PEOPLE TO KEEP AND BEAR ARMS, SHALL NOT BE INFRINGED
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
RELEASE // lbry // 7406a27905df721cd957da5…
Released April 21, 2026, 10:20 PM
Indexed March 9, 2026, 12:52 AM
5.0MiB
“
”
Big thanks to rucksichtslos for their original FTN.5 Tube Stamping Jig.
The original design was a little tight, so I loosened it up slightly and made a few changes to reduce friction. I've also made it 2 parts, in case it gets stuck, you can disassemble it to get the parts off of the tube easier.
I've also created a 2D printable guide to help with spacing. Print it at 100% scale to ensure proper sizing and spacing. Instructions are on the guide.
Designed to use 1/8"(3mm) stamps. Here's the set I used. https://a.co/d/0aGFjqqy
Update 04 21 2026 - Added a 35mm OD x 32mm ID model for use with the FTN 5 Rimfire