315
5
NECESSARY TO THE SECURITY OF A FREE STATE, THE RIGHT OF THE PEOPLE TO KEEP AND BEAR ARMS, SHALL NOT BE INFRINGED
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
RELEASE // lbry // 1dfabd9413e879d63352f5f…
Released January 19, 2026, 10:59 PM
Indexed March 9, 2026, 1:10 AM
92.6KiB
Creative Commons Attribution 4.0 International
“
”
My FTN5 Rimfire Flow Polygon Suppressor (Printed in Polymaker PA6-CF20) got stuck on the 3/4"x16 adapter, so I made this wrench to get it off without wrecking the flats. Slide it down as close to the threads as you can.
It slips over the outside of the suppressor and lets you apply torque evenly. Worked for me in Sunlu PLA+ 2.0. Print as oriented. You might have to play around with the scale a bit because of machine and material tolerances.
Print settings I used. (This print used around 43g of filament and took under 2 hours with my settings and machine)
Layer Height: 0.20
Walls: 6
Top Layers: 5
Bottom Layers: 5
Infill: 30% Cubic
Supports: Default tree; 40 degrees
Nozzle Temp: 230c
Bed Temp: 60c
LBRY Tags: ftn5; guncad; suppressor; 3d print
No archive preview for this release