This is a remix of Scout339's ShortStuff 22lr can that gives it the outward appearance of GSI-Tac's Sidewinder.
Includes 1-2x28, 3-4x16, and 5-8x24 thread options as well as MAF TAG versions.

Scout's original has fantastic suppression properties but it also has a pretty dull appearance so I wanted to pimp it out a bit. I also slightly reduced the diameter for aesthetics, its not entirely as quiet as the original but its reasonably close enough.

Print with the included .3mf file for best results, there's an embedded support piece at the bottom that should detach without much trouble so you don't have to generate any in the slicer.

There's lots of other little optimizations in the .3mf but if you can't make use of it, just print with max walls or 100% rectilinear in concentric pattern. Turn off 'reduce infill retraction' if you use infill. Keep the threads at minimum 0.16 layer height via modifiers. PLA+ should be good enough.

Respect your local laws.

ShortStuff: https://odysee.com/@Scout339:8/ShortStuff:f
Sidewinder: https://odysee.com/@GSI-Tac:8/Sidewinder:2

LBRY Tags: 3d2a; 22lr; suppressor; guncad; form1