A fully printed magazine pouch for AR15 magazines cloned from the ITW FastMag. It can be mounted on MOLLE webbing or on a belt loop. TPU bands provide tension to keep the magazine securely in place. Primarily based on a Gen III FastMag with Gen IV mounting straps.

For each pouch, print all TPU parts and ‘QuickMag - Front’, along with either version of ‘QuickMag - Back - X’.

The MOLLE version has two ears that tuck under MOLLE webbing. The belt version can be mounted to a belt with the Belt Adapter or can be mounted to the front of another QuickMag.

Recommended Print Settings (Rigid Parts):
Material: PLA+
Layer Height: 0.2mm
Wall Line Count: 4
Infill Percentage: 20%+
Support: Tree

Recommended Print Settings (TPU):
Material: TPU 95A
Layer Height: 0.2mm
Wall Line Count: 4
Infill Percentage: 100%
Support: No

This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/

LBRY Tags: guncad; mag pouch