253
11
NECESSARY TO THE SECURITY OF A FREE STATE, THE RIGHT OF THE PEOPLE TO KEEP AND BEAR ARMS, SHALL NOT BE INFRINGED
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
PRINT A F*CKING GUN ★
RELEASE // lbry // 84068ad461f21851a1bbb78…
Released December 20, 2023, 4:54 AM
Indexed March 9, 2026, 1:06 AM
450.2KiB
Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International
“
”
Wayllshine E6 850nm Illuminator Picatinny Mount by Qwerm
An offset picatinny mount for the Wayllshine E6 850nm IR light, a $15 IR illuminator. You can also get it for $10 from Aliexpress Here
Orientation: Print on it's side.
Settings Used:
Material: PLA+
Extruder Temp: 210c
Bed Temp: 60c
Layer Height: 0.20mm
Wall Line Count: 4
Infill Percentage: 30%+
Support: Yes
Support Type: Tree Support
Fuzzy Skin: Disabled
Hardware Needed:
1x M5 30mm Socket Head Screw
2x M5 10mm Socket Head Screw
3x M5 Hex Nut
Credit to FFFTech for the Picatinny mount template.
LBRY Tags: 3d printed; guncad; ir illuminator; light mount; 3dprint
No archive preview for this release