-All Files are individually separated
-All Files are Print Orientation Ready
-All files are stippled, Micro Lines
-XL and Macro Grips
-Safety and No Safety Chassis
-Suppressor Cut Shroud w/Direct Sling Mount
-Full Shroud w/Direct Sling Mount
-Topless Shroud w/Direct Sling Mount
-Full Shroud Slim Sides
-Five-degree offset on rear Picatinny
-Micro Lines Stipple
-Designed for use with suppressors up to 35mm Outer Diameter
-Designed around TLR-1HL Pistol Light
-Direct front sling mount designed for use with Adaptiv Defense Carbine sling, or other thinner slings
-Rear Sling point designed for use with Blue Force Gear U-Loop
Printer Settings:
-IMPORTANT-Bottom Shell Thickness: 6mm
-Print Frame/Chassis upside down
-12 wall loops
-66% gyroid infill
-Tree Supports
-Paint supports on optic mount overhangs, example render provided.
-Take extra care to clear out all support material, and use high-quality filament. FCU snaps in snug
Filament:
-Recommended filament type: PCCF
-Chassis will run in eSun PLA+. Hot/heavy loads or increased back pressure/light recoil spring can snap the rear FCU center pin block
If cracked, the receiver pin will rest on enlarged outer side walls and remain functional, albeit undesirable
Looking at bringing an extended FCU receiver pin to market to help with those stuck using PLA+
Hardware:
-Side screws: Socket Head Screw M3x.5 12mm
-Nose Screw: Socket Head Screw M3x.5 12mm to 18mm
-Coupler Nut M3x.5 10mm
https://www.ebay.com/itm/316826410877?chn=ps&mkevt=1&mkcid=28&google_free_listing_action=view_item
Licensing:
-Creative Commons Non-Commercial, including all modified versions thereof
-Editable and Modifiable for personal use
-ATF approval pending
-Commercial licensing rights owned by Iron Saddle Armory
Thank you for your patience. I hope this complements your soup season. Comments, critiques, and accolades appreciated.
Use eye protection when shooting recreationally, please. God bless you all, and stay safe.
Update: .15mm gap increase, per side, between slide and shroud.
LBRY Tags: sig; p365; macro; pdw; chassis