1/2/2025 user Jonathan Wolff reported box will also hold Anschutz 10 round magazines

8/21/2024 9/21/2024 Added two Savage labeled lids and one blank lid.

2/22/2024 User reddog kindly advised box will hold Savage MkII 10 round mags.

8/7/2023 Added Version 3 of magazine box.  The original version is a very tight fit between lid and magazine heels.  This was deliberate to stop movement/rattle.  One person who printed it had problems with fit, so I made a V3 which is 4mm taller than V2 to give more room for variation amongst printers.

This is a box with slide in lid designed to hold five 22LR magazines, loaded or unloaded, for a CZ457 or Savage Mark II. There is an additional front compartment to hold notes on ammo, small tools or in this case, my Leatherman Squirt. The lid slides on and off very easily. If you want a tighter lif  fit, you might increase it’s size 1 or 2 percent on the X axis in your slicer and hand fit, or just stick a small foam block in the front compartment to give a bit of drag.

If someone would like me to change the lid to reflect a CZ 455 or 452, ask and I will make one up.

This was designed to be printed without supports.  You do not need them for the slot the lid slides into.

Printables Tags: box; clip; ammo; storage; storagebox; rifle; cz; magazine; mkii; anschutz; savage; 22lr; cz455; cz457; cz452; savagemarkii; savagemkii