31/1/19 - Bottom plate without leaf mark added.

17/9/18 - I had to return back to fix some issues. I have enlarged height of the follower (P02) and added pictures with places to be glued. So now it should be little bit easier to make.

After shock of this part price i have decided to try to make my own with a 3D printer. It needs a bit of skill, but now the magazine works properly even with printed spring. Unfortunately this kind of spring does not allow you to fill mag with more than three rounds.

If you can use steel spring, it would be better.

All modifications are allowed, but please do not use this model for commercial purposes. I would like to fight high prices of these parts by printing them for free (or for price of used filament).

See my other work at www.tisk3dmodelu.cz

Print instructions

Category: Sport & Outdoors Print Settings

*Printer Brand:* Prusa

*Printer:* i3 MK2S

*Rafts:* No

*Supports:* No

*Resolution:* 0.2

*Infill:* 100%

*Notes:*

material PETG, layer height 0.2mm, 2 perimeters, 100% infill, all other settings were default in Prusa slic3r

Main body, follower and bottom part should be rotated 90° in x axis before slicing. There should be some support material for the follower too.

Post-Printing

*Bottom plate and gluing*

I have filled space in shape of spade with kyanoacrylate glue and later I have brushed whole bottom to a high glossy surface.

I recommend to glue bottom and main body together after completing the magazine. But first be sure, your spring works properly. Do not glue the follower, but you may grease it for better movement inside of magazine.

Printables Tags: rifle; thingiverse; magazine; 22lr; 455; csa; cz455; zkm