This is a bullet/brass tray to fit the Hornady Classic reloading press.

Print with 4 walls, 2 bottom layers, 3 top layers, 20-25% gyroid infill. With a 0.6mm nozzle you can do 3 walls.

Supports are needed touching buildplate only to print mount.

The dovetail fit is highly affected by the flow settings in your slicer. If your slicer settings are tuned the V1 of the mount should work best, but if it's a loose fit then the V2 of the mount can be printed since it's just a hair larger in the dovetail.

Will need 2 #8 5/8 screws to secure the mount and clamp to the press.

Printables Tags: brass; cartridgereloading; hornady; reloading; reloadingdies; reloadingpress; reloadingtools; reloadingtray; bullettray; hornadyclassic; brasstray